Description
The SDC-30 Samlex America high efficiency switch-mode step-down DC-DC converter converts an input voltage of 24 VDC nominal (range 20 VDC to 35 VDC) to a highly regulated output voltage of 12 VDC nominal (13.8 VDC) at 30 Amps.
The SDC-30 DC-DC converter is non-isolated (no galvanic isolation between input and output) and meant for use in negative ground systems. Features include overload, over-heating, reverse polarity and over-voltage protection.
| Model# | Input Voltage | Output Voltage | Dimensions | Output | Fuse Rating | Weight |
| SDC-30 | 20-32 VDC | 13.8 VDC +/- 1% | 1.9 L x 3.5 W x 5.9 H
inches |
30 A Continuous
*35 A Current |
1.2 lbs | |
*NOTE: In current limit condition, the output voltage will drop if the current draw increases beyond the current limit value of 12.5 A
| Applications |
| Earth moving equipment Heavy trucks Buses Marine vehicles CB radios 12 Volt lighting systems AM/FM sound systems |
| Design Features |
| Advanced switchmode design Mount in almost any location Compact and light weight Reverse polarity protection High efficiency Cycle by Cycle Current limiting circuit Overvoltage Protection Short Circuit Protection |
Attention California residents: Proposition 65 Warning: Some of the products sold through this website contain/may contain chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
Reviews
There are no reviews yet.